Harman Kardon BDS 280 - Remote Control Preparation; Installing and Using the Remote Control; Programming the Remote Control

To Next Page

To Previous Page

BDS



5.UsethedowncursorbuttontoselectSoundandpressOK.Next,usethedowncursortoselectEzSet/EQandpressOK.



6.Remainsilentwhilethetestnoiseplaysthroughthespeakers.Asthetestnoisecirculatesamongthespeakers,thescreenwillshowwhich

speakerisbeing

tested.



7.Whenthetestingprocessiscomplete,the“Testing…”messageonthescreenwillchangeto“Alltestsdone!”

8.PresstheBackbuttontoexittheEzSet/EQtestprocedure.

NOTE:Ifthetestfails,the“Testing…”messageonthescreenwillchangeto“EzSet/EQfailed.Makesureall

speakersareconnectedandtheroomis

quietlythentryagain.”PresstheBackbutton,makesureallspeakersarecorrectlyconnectedandperformthetestagainfromstep5.Makesure

theroomremainssilentduringthetest.

Bluetoothautopair

BDS580andBDS280provideaNFCfeatureforBluetoothauto‐pairingpurpose.BringNFCcellphoneandtouchBDSNFClogo,thecellphonewill

connectwithBDSbyBluetoothandimplementstreamingmusic.



UsingtheBDS

PresstheremotecontrolHomebuttontodisplaytheHomeMenuscreen:

Other manuals for Harman Kardon BDS 280