Harman Kardon BDS 400 - Page 36

Specifications
BDS
36
SAT-TS60 Satellites (BDS 800 and
BDS 400 systems)
CEN-TS60 Center (BDS 800 system)
Midrange transducer: Two x 3" (75mm) flat-panel drivers, video-shielded Two x 3" (75mm) flat-panel drivers, video-shielded
High-frequency transducer: 1" (25mm) CMMD
®
Lite dome, video-shielded 1" (25mm) CMMD Lite dome, video-shielded
Recommended power: 10 – 120 watts 10 – 150 watts
Impedance: 8 ohms 8 ohms
Sensitivity: 86dB (2.83V/1m) 83dB (2.83V/1m)
Connector type: Push-spring terminal Push-spring terminal
Enclosure type: Sealed Sealed
Dimensions (H x W x D): 11-25/32" x 4-11/32" x 3-15/32"
(299mm x 110mm x 88mm)
(Height measurement includes removable stands.)
4-11/32" x 10-11/16" x 3-15/32"
(110mm x 272mm x 88mm)
Weight: 3.3 lb (1.5kg) 3.3 lb (1.5kg)
SAT-TS11 Satellites (BDS 700 system) CEN-TS11 Center (BDS 700 system) SAT-TS7 Satellites (BDS 300 system)
Midrange transducer: Two x 3" (75mm) cones, video-shielded Two x 3" (75mm) cones, video-shielded 3" (75mm) cone, video-shielded
High-frequency transducer: 1/2" (13mm) dome, video-shielded 1/2" (13mm) dome, video-shielded 1/2" (13mm) dome, video-shielded
Recommended power: 10 – 120 watts 10 – 80 watts 10 – 80 watts
Impedance: 8 ohms 8 ohms 8 ohms
Sensitivity: 86dB (2.83V/1m) 86dB (2.83V/1m) 86dB (2.83V/1m)
Connector type: Push-spring terminal Push-spring terminal Push-spring terminal
Enclosure type: Sealed Sealed Sealed
Dimensions (H x W x D): 9-9/16" x 3-15/16" x 3-5/8"
(243mm x 100mm x 92mm)
4" x 9-1/2" x 3-5/8"
(102mm x 241mm x 92mm)
6-5/8" x 3-15/16" x 3-5/8"
(167mm x 100mm x 92mm)
Weight: 2.2 lb (1.0kg) 2.2 lb (1.0kg) 1.3 lb (0.6kg)
SB 10 Soundbar (BDS 600 system)
Low-frequency transducer
Left:
Right:
Center:
3" (76mm) paper cone, video-shielded
3" (76mm) paper cone, video-shielded
Two 3" (76mm) paper cones, video-shielded
High-frequency transducer
Left:
Right:
Center:
3/4" (19mm) silk dome, video-shielded
3/4" (19mm) silk dome, video-shielded
3/4" (19mm) silk dome, video-shielded
Recommended power
Left and Right:
Center:
60 watts (each)
100 watts
Impedance: 8 ohms
Sensitivity: 84dB (2.83V/1m) (each channel)
Connector type: Push-spring terminal
Enclosure type: Sealed
Dimensions (H x W x D): 4-5/16" x 36-1/4" x 3-1/2"
(110mm x 920mm x 89mm)
Weight: 8.1 lb (3.67kg)
HKTS200SUB and HKTS210SUB
Subwoofer (all systems)
Low-frequency transducer: 8" (200mm) down-firing cone
Amplifier power: 200 watts
Frequency response: 45Hz – 200Hz (–6dB)
Controls: Volume, phase, bass boost
Connections: LFE input, left and right RCA line-level inputs
Enclosure type: Sealed
Power requirement: 120V, 60Hz (USA)
220V – 240V, 50/60Hz (EU)
Power consumption: <1W (standby); 200W (maximum)
Dimensions (H x W x D): 13-29/32" x 10-1/2" x 10-1/2"
(353mm x 267mm x 267mm)
(Height measurement includes feet.)
Weight: 19.8 lb (9kg)