Need help?Do you have a question about the Harman Kardon HS 200 and is the answer not in the manual?
General| HDMI Inputs | 3 |
|---|---|
| HDMI Outputs | 1 |
| Type | Home Theater System |
| Number of Speakers | 5 |
| DVD Player | Yes |
| Surround Sound Formats | Dolby Digital, DTS |
| Channels | 5.1 |
| Bluetooth | No |
| Remote Control | Yes |
| Frequency Response | 20Hz - 20kHz |
| Video Upscaling | Yes |
| Disc Formats Supported | DVD, CD |
| Inputs | Analog |
Details the HS 200's capabilities, including its versatility, audio-video controller, DVD player, and surround sound modes.
Provides essential safety guidelines, including voltage verification, handling power cords, and avoiding cabinet opening.
Details advanced video features like HDMI, 10-bit DACs, progressive scan, and RGB output via SCART.
Highlights 2.1 surround sound, advanced audio quality, and coaxial digital output.
Explains the function of the power button and the indicator light.
How to release a disc from the slot loader.
How to adjust the volume using the knob and its effect when muted.
Instructions for inserting discs into the slot loader.
For connecting to displays with component video inputs, including HD progressive scan.
Connects to TV's SCART socket for improved video quality via a single cable.
Connects the system to an AC outlet.
Connects to the HDMI input of high-definition displays for best picture quality.
Connects to the SUB/LFE input on the subwoofer.
Connects to the matching terminals on your left and right speakers.
Powers on the unit, selects the source, and changes the remote's control mode.
Powers on the unit, selects the source, and changes the remote's control mode.
Turns off the HS system to standby mode.
Activates a setting or option, or confirms selections.
Releases the disc from the loader.
Accesses the On Screen Display Menu.
Accesses the On Screen Display Menu.
Used to move the cursor in the OSD menus.
Used to move the cursor in the OSD menus.
Freezes a picture (with DVD/VCD) and pauses the playback signal (CD).
Begins to play disc (closes disc tray first, if it is open).
Stops playback of the disc.
Stops playing a disc.
Increases or decreases the master volume level.
Increases/decreases the master volume level.
Instructions for connecting audio source equipment and speakers, emphasizing cable quality and polarity.
Details AC power requirements and connection procedures.
Guidance on connecting video equipment, recommending high-quality cables.
Step-by-step guide for powering up the HS 200 Controller for the first time.
Details how to connect the TV and other components for audio and video signals.
Instructions for initial playback setup, including TV input selection and disc insertion.
Instructions for connecting the HS system to a TV via HDMI for optimal picture quality.
Connects the HS system to the TV using a SCART cable for video and audio.
Connects the HS system to the TV using an S-Video cable.
Connects the HS system to the TV using composite video cables.
Connects to displays with component video inputs for progressive scan.
Guides on accessing and navigating the Set Up Menu for system configuration.
Covers settings like Display Language, Preferred Subtitle Language, Panel Time-Out, and Status Bar Time-Out.
Explains how to set parental controls, passwords, and rating levels.
Covers settings for Preferred Audio Language, Dynamic Range, Tone Control, Bass/Treble Levels, and DVD Sound Mode.
Covers Aspect Ratio, TV Standard, Scan Type, Video Output, Scart Output, Video Mode, and Video Resolution.
Covers output level adjustment for speaker channels.
Adjusts output levels for each speaker channel using a test tone.
Accesses the Test Screen for video adjustments like Color, Contrast, Brightness.
Provides a still image for testing TV settings and video performance.
Guides on adjusting Brightness, Contrast, and Color using the test screen.
Adjusts color control for natural-looking colors without overdoing it.
Adjusts sharpness settings to minimize white lines between gray scale bars.
Instructions for calibrating picture settings using the supplied test disc.
Step-by-step guide on how to teach the HS 200 remote to control other devices.
Instructions for removing learned codes for single buttons, devices, or all devices.
How to program macros to repeat sequences of commands with a single button press.
Troubleshooting steps for when the unit has no power.
Steps to resolve issues with no picture being displayed.
Troubleshooting for picture noise or interference.
Resolving issues with incorrect screen aspect ratio display.
Troubleshooting steps for no sound or low volume.
Steps to correct unbalanced or reversed audio channels.
Troubleshooting steps for severe hum or noise in audio.
Troubleshooting for automatic volume reduction, possibly due to high temperature.
Steps to resolve issues with tuning radio stations.
Troubleshooting steps for when the remote control is not working.
Steps to resolve issues when a disc fails to play.
Troubleshooting for general system malfunctions, suggesting power cycle.
Specifications for the DVD player, including pickup, signal system, resolution, and audio/video S/N ratios.
General specifications including power requirements, consumption, dimensions, and weight.
To Next Page
