What to do if Harman Kardon Amplifier has no audio from one or more channels?
If your Harman Kardon Amplifier turns on but you're not getting audio from all channels, first, check that the inputs are correctly connected to the proper jack. Next, verify that the speaker connections are secure. Finally, ensure that the settings and output levels from your preamp, processor, or controller are correctly configured.
How to fix Harman Kardon Amplifier that will not turn on?
If your Harman Kardon Amplifier isn't turning on, check the master power switch to ensure it's on. Also, make sure the power cord is firmly inserted into the receptacle. If the power light LED is amber, inspect all connections and switch settings for the remote system. Lastly, check the external trigger device.
Why does Harman Kardon Amplifier audio play, then cut off?
If the audio from your Harman Kardon Amplifier plays and then cuts off, the amplifier may be shorted. Check the speaker connections for a short circuit. The LED indicator will be red if a short circuit is detected.
Check amplifier's line voltage configuration before connecting to avoid hazards or damage.
Ensure circuit has adequate capacity (20A recommended) for amplifier's high current draw.
Use only the supplied power cord; avoid extension cords and improper cord placement.
Do not open the cabinet; it contains no user-serviceable parts and poses a shock hazard.
General| Brand | Harman Kardon |
|---|---|
| Model | CITATION 5.1 |
| Category | Amplifier |
| Language | English |
To Next Page
