/ PRODUCT OVERVIEW
9
2. SUB OUT
• Connect to a subwoofer.
3. AUX IN (L/R)
• Connect to RCA audio outputs on an external device.
4. SPEAKER OUT (L/R)
• Connect to a pair of loudspeakers.
5. SERVICE (for technical personnel only)
6. TRIGGER OUT 12V
• Connect to the 12V trigger input on an external device.
7. IR REMOTE IN
• Connect to the IR extender.
8. LINE OUT
• Connect to audio input on an external device.
9. POWER
• Connect to the power cable.
10. ETHERNET
• Connect to the Internet (RJ45 connector).
11. PAIRING
• Pair with a Harman Kardon wireless subwoofer and / or
surround speakers (such as Citation Tower, Sub / Sub S
and Citation Surround).
12. RESET
• Press and hold for 5 seconds to restore the factory
settings.
To Next Page
Loading...
