Need help?Do you have a question about the Harman Kardon HK 990 and is the answer not in the manual?
General| Type | Integrated Amplifier |
|---|---|
| Input Impedance | 47k ohms |
| Power Output | 150W per channel into 8 Ohms, 20Hz – 20kHz at < 0.07% THD |
| Dimensions | 440 x 170 x 430 mm (W x H x D) |
| Speaker Load Impedance | 4Ω - 8Ω |
| Digital Inputs | 2 x Coaxial, 2 x Optical |
| Input Sensitivity | 250mV |
Lists included accessories for the HK 990 integrated amplifier.
Detailed descriptions of the HK 990’s front panel buttons and indicators.
Detailed explanation of all input and output jacks on the HK 990’s rear panel.
Instructions for safely removing and disposing of batteries from the remote.
Explains the operation of each button on the HK 990 system remote control.
Guides on configuring each input type, including analog and digital connections.
Describes different audio processing modes for analog and digital signals.
Manual configuration of subwoofer and crossover settings.
Automatic system setup using the EzSet/EQ microphone.
Detailed explanation of the automatic EzSet/EQ calibration process.
Adjusts balance and subwoofer levels after speaker setup.
How to select and listen to various audio sources connected to the amplifier.
Guide on recording audio from one source to tape or CDR.
To Next Page
