/ GET STARTED
11
2) Plug one end of the power cord into the AC IN connector
on the back of CITATION BAR (sold separately), then plug
the other end into an AC (mains) outlet.
Æ The soundbar will take about 30 seconds to load, then
enter standby mode and ready for use.
Speaker Setup
NOTE:
• Keep a maximum distance of 5 meters between CITATION
SURROUND and your CITATION BAR.
1) Press “Settings” > “Speaker Setup” > “Pairing” > “Surround
Setup” on the touch screen of CITATION BAR, the soundbar
will start to search for satellite speakers.
To Next Page
Loading...
