Need help?Do you have a question about the Harman Kardon HD 950 and is the answer not in the manual?
Signal Format| sampling frequency | 32 kHz to 96 kHz |
|---|---|
| oversampling | 24-bit/176.4 kHz |
Discrete Analog Output Section| frequency response | 20 Hz – 20 kHz +0/-0.5 dB |
|---|---|
| total harmonic distortion (THD) | <0.0015% @1 kHz |
| dynamic range | > 100 dB |
| signal-to-noise ratio | > 110 dB |
| channel separation | > 100 dB |
| line-output level | 2.0 V |
Power| power requirement | 100-240 V 50/60 Hz |
|---|---|
| power consumption (on) | <20 Watts |
| power consumption (standby) | <2 Watts |
Weight and Dimensions| height | 63 mm |
|---|---|
| width | 440 mm |
| depth | 332 mm |
| weight | 3.8 kg |
Essential safety precautions for operating the HD 950 CD player.
Guidance on choosing a suitable and safe place for the CD player.
Instructions on how to clean the CD player safely and effectively.
Steps to take when relocating the CD player unit.
Instructions for safely unpacking the CD player and retaining packaging.
How to program up to 99 tracks in a specific playback order.
Modifying existing programmed track sequences.
Reviewing the order of programmed tracks.
Removing programmed tracks or clearing the entire program.
Overview of repeat functions for tracks, discs, or selected segments.
Repeating a single track continuously.
Repeating the entire disc or all programmed tracks.
Programming a specific passage for continuous playback.
To Next Page
