Harman Kardon HD730 - Rectifying Wrong Programmed Track; Checking the Contents of the Program; Clearing the Programmed Tracks; Edit for Recording

ENGLISH
Example: When the desired tape
length is 46 minutes.
Each time the TAPE SIZE button is
pressed, the tape length display
changes as follows.
You can edit up to 20 tracks to be
recorded according to the tape length.
AUTO EDIT
1. In the stop mode, press the EDIT
button.
Each time the CHECK button is
pressed, the programmed track
will appear in the programmed
sequence.
Each time the STOP/CLEAR button is
pressed during programming or after
completion of programming, the
programmed tracks are cleared one
by one in the opposite sequence.
If you wish to clear a specific track,
find that track with the PROGRAM/
CHECK button and clear with the
STOP/CLEAR button.
By pressing the OPEN/CLOSE or
STOP/CLEAR button over 4 seconds
in the stop mode, all programmed
tracks will be cleared.
b. Select the desired tape length at
your option with the NUMERIC
buttons.
Example: When the desired tape
length of each side is 23 minutes,
press, 2, 3, 0 and 0 to enter
“23:00”.
8
EDIT FOR RECORDING
A SPACE AUTO EDIT
11 12 13 14 15
16
17
18 19
67 8910
2 3451
A SPACE AUTO EDIT
MIN
11 12 13 14 15
16
17
18 19
67 8910
2 3451
SEC
AUTO EDIT IS COMPLETED
AFTER 2
SECONDS
A SPACE AUTO EDIT
11 12 13 14 15
16
17
18 19
67 8910
2 3451
A SPACE AUTO EDIT
MIN
11 12 13 14 15
16
17
18 19
67 8910
2 3451
SEC
3. Press the EDIT button to automatically
edit the tracks to be recorded.
A
B
A SPACE AUTO EDIT
TRACK
IOM
69
2 3451
AFTER ABOUT 2 SECONDS
AFTER ABOUT 2 SECONDS
A
B
A SPACE AUTO EDIT
TRACK
MIN
11 12 13 14
18
78 10
A
B
A SPACE AUTO EDIT
TRACK
MIN
11 12 13 14
18
6 78910
23451
SEC
SEC
THE TRACKS AND
REMAINING TIME OF
THE SIDE A APPEAR
THE TRACKS AND
REMAINING TIME OF
THE SIDE B APPEAR
AUTO EDIT IS COMPLETED
2. a. Select the desired tape length with
the TAPE SIZE button.
•
CHECKING THE CONTENTS OF THE
PROGRAM
You can check the contents of the
program during programming or after
completion of programming.
CLEARING THE PROGRAMMED
TRACKS
•
•
•
•
RECTIFYING ANY WRONG PRO-
GRAMMED TRACK
PROGRAM
TRACK
MIN
17
8
4
SEC
PROGRAM
TRACK
17
810
4
PROGRAM
TRACK
MIN
810
4
SEC
When you made a mistake and
programmed any wrong track, you
can rectify as follows.
Example: When you made a mistake
and stored track 17 instead of track
10.
•
1. Find track 17 with the PROGRAM
button.
2. Select track 10 with the SKIP or
NUMERIC buttons.
3. Press the PROGRAM button. (Only
when you use one of the SKIP buttons.)
C-46 C-54 C-60 C-74 C-90 C-120
HD730 Engelsk 12/01/98, 15:3111