Need help?Do you have a question about the Harman Kardon HD730 and is the answer not in the manual?
General| Type | CD Player |
|---|---|
| Disc formats | CD |
| Frequency Response | 20Hz to 20kHz |
| Output Level | 2V |
| Digital outputs | coaxial |
| Channels | 2 |
Guidance for connecting the CD player to audio systems.
Instructions for cleaning and protecting the laser pickup.
Information on potential signal interference with other devices.
Guidelines for routing and protecting the power cord.
How to clean the compact disc player using dry cloth.
Precautions against operating near water.
What to do if abnormal smells are detected from the unit.
Advice on seeking professional service for the unit.
Information about retaining packing materials for transport.
Controls the unit's power on/off function.
Houses the CD for playback; opens/closes with a button.
Opens and closes the CD disc drawer.
Receives signals from the remote control unit.
Shows information like track number, time, and mode.
Starts disc playback.
Temporarily interrupts playback.
Stops playback or clears programmed tracks.
Stores tracks for programmed playback.
Checks stored programmed tracks.
Plays disc tracks in random sequence.
Repeats a single track or all tracks.
Repeats a specific passage on the CD.
Displays elapsed or remaining track/disc time.
Searches for peak level passages for recording.
Edits tracks for recording onto cassette tape.
Selects tape length for recording.
Deletes undesired tracks from a program.
Searches for a passage in fast reverse.
Searches for a passage in fast forward.
Returns to the beginning of the current track.
Moves to the beginning of the next track.
Connection for listening with headphones.
Adjusts headphone and audio output volume.
Connects the CD player to receiver or amplifier using output jacks.
Connects to digital input for higher quality audio output.
Connects the unit to the AC power outlet.
Instructions for inserting and removing CDs from the player.
How to play a disc from start to finish.
Temporarily pauses playback without stopping the track.
Stops playback before the disc ends.
Methods for searching tracks or passages on a CD.
Navigates to the beginning of the next or previous tracks.
Advances playback to the beginning of the next track.
Returns playback to the beginning of the current track.
Selects a track to start playback from when stopped.
Searches for specific passages within tracks for playback.
Repeats all tracks, one track, or a specific passage.
Creates custom playback sequences by programming tracks.
Verifies the order of programmed tracks.
Removes programmed tracks from memory.
Edits tracks for recording onto cassette tape using auto or manual modes.
Removes unwanted tracks from a CD for playback.
Steps to remove specific tracks from a CD.
Helps find peak levels on a CD for optimal recording.
Reviews tracks that have been marked for deletion.
Restores previously deleted tracks back into the program.
Changes how time information is displayed on the unit.
Activates Intro Scan mode for previewing tracks.
Selects tracks directly and aids programming/deleting.
Adjusts the brightness of the unit's display.
Important notes on battery replacement, usage, and type for the remote control.
Solutions for power or indicator light issues on the unit.
Troubleshooting when playback doesn't start despite lights.
Resolving audio output problems when playback is indicated.
Tips for preventing disc skipping or stuttering during playback.
Troubleshooting distorted audio output.
Solutions for when unit controls are not functioning.
How to fix issues with the unit's display.
Troubleshooting issues with the remote control not working.
To Next Page