Harman Kardon HD730 - Concerning Use of Batteries; Battery Usage Notes

ENGLISH
Two batteries are provided with your
remote control. To load batteries:
1. Locate the cover over the battery
compartment on the back of the
remote control. Remove the cover by
sliding it in the direction of the
embossed arrow.
2. Insert the two AA (1.5V/R6/UM3)
batteries. Make sure you insert the
batteries according to the + and –
polarity symbols at the bottom of the
battery compartment.
3. Replace the cover of the battery
compartment.
12
NOTE:
1. When you replace weak batteries,
replace both at the same time.
2. Remove the batteries if it is not to
be used for an extended period of time.
3. Do not use rechargeable batteries
(Ni-Cd type).
CONCERNING USE OF
BATTERIES
23 FEET
7 M
30° 30°
REMOTE CONTROL UNIT
HD730 Engelsk 12/01/98, 15:3115