HD750
Rear Panel Connections
Digital Output
Audio Outputs
Remote Control Output
Remote Control Input
AC Power Cord
2 3 1 5
4
AC Power Cord: Connect this plug to an AC
outlet, if the outlet is switch controlled, make
certain that the switch is in the ON position.
Audiio Outputs: Connect these jacks to the CD
audio inputs of your receiver, surround processor or
preamplifier.
Digital Output: Connect this jack to the coaxial
digital input of an external digital-to-analog
converter for direct access to the digital signals of
HD750, DO NOT connect this jack to the standard
audio inputs of any device.
Remote Control Input: Connect the out-
put of a remote infrared sensor or the remote
control output of another compatible Harman
Kardon product.This will enable the remote con-
trol system to operate even when the front panel
Remote Sensor
is blocked. It will also allow
use of the HD750 with optional, external control
systems.
Remote Control Output: Connect this
jack to the input of another compatible Harman
Kardon remote controlled device to have the
remote sensor on the HD750 provide signals to
other products.
5
To Next Page
Loading...
