Do you have a question about the Harman Kardon HK330I and is the answer not in the manual?
Power output | 20 watts per channel into 8Ω (stereo) |
---|---|
Frequency response | 20Hz to 20kHz |
Input sensitivity (MM) | 2.5 mV |
Input sensitivity (line) | 150 mV |
Signal to noise ratio (line) | 80dB |
Tuning range | FM: 87.5-108 MHz, AM: 520-1610 kHz |
High Current Capability and Dual Speaker System support for enhanced audio.
Includes Center Tuned indicator, Push Buttons, and bright Dial Pointer.
Covers power, handling, cabinet, installation, and cleaning advice.
Volume, Balance, Tone (Bass/Treble), and Loudness controls for sound adjustment.
Power, Function, Speaker Selectors, Muting, Audio Mode, Tape Monitor.
Dial Pointer, Signal Strength, Center Tuned, Stereo, Tape Monitor indicators.
Terminals for AM/FM antennas and turntable ground.
Connects turntables, tape decks, and auxiliary sources.
Speaker terminals and power cord/outlet.
Guidance on using the ferrite loopstic and outdoor AM antennas.
Information on feeder antennas, outdoor antennas, and feeders.
How to match impedance when using 75Ω coaxial cables.
Recommended locations for optimal FM outdoor antenna reception.
Steps for connecting speakers and other audio components.
How to connect 75Ω coaxial, 300Ω feeders, and AM antennas.
Guide to tuning and listening to FM/AM radio stations.
Procedures for improving reception of weak FM signals.
Instructions for playing audio from a turntable.
How to play audio from external sources via AUX/DAD.
Steps for playing audio from a tape deck.
Instructions for recording audio onto a tape deck.