Harman Kardon HK6100 User Manual

Specifies power output for both channels driven, 20-20,000Hz.

Details the high current delivery capability for dynamic music.

Defines the bandwidth at half rated output.

Specifies the frequency response at 1 Watt output.

Indicates the efficiency of speaker connection.

Measures audio clarity relative to rated output.

Details signal input requirements for Phono and other sources.

Specifies the overload capacity for the phono input.

Describes bass and treble boost/cut ranges.

Provides the physical dimensions of the unit.

Lists the weight of the amplifier for different models.

Specifies voltage and frequency for different regions.

Details the electrical power usage of the unit.

Explains the high current output feature for dynamic music reproduction.

Highlights exceptional bandwidth for transient accuracy.

Discusses the design for low distortion and wide bandwidth.

Notes the use of discrete components for high performance.

Describes the protection system for speaker and amplifier safety.

Emphasizes matching the unit's voltage to the power outlet.

Provides guidance on proper power cord handling and care.

Recommends suitable locations and conditions for installation.

Warns against opening the unit to prevent shock or damage.

Offers instructions on how to clean the amplifier.

Instructions for connecting external audio sources to the amplifier.

Guidance on correctly connecting speaker systems to terminals.

Explains how to turn the amplifier on and off.

Describes the indicator light for power status.

Details the connection for stereo headphones.

How to select the desired speaker system(s).

Adjusts the low frequency sound level.

Adjusts the high frequency sound level.

Balances sound between left and right channels.

Used for tape deck monitoring and copying.

Selects the program source for listening.

Controls the overall sound volume level.

Enhances sound quality at low listening volumes.

Step-by-step guide for playing vinyl records.

Instructions for tuning and listening to radio.

Steps for playing audio from a CD player.

Guide for listening to video components or auxiliary inputs.

Instructions for recording audio onto tape decks.

Procedure for copying tapes from one deck to another.

Steps for playing tapes from connected decks.

Addresses issues with the power indicator not lighting up.

Troubleshoots situations where no sound is produced.

Diagnoses issues with sound from a single speaker.

Solves problems with left and right stereo channels being swapped.

Addresses low-frequency noise from turntables.

Troubleshoots feedback or howling during turntable playback.

Offers solutions for general poor audio quality.