Connecting the speaker system to the computer.
Step 1 If you have an
integrated sound solution; or a stereo sound card, connect the green connector
from the subwoofer into the green jack on the computer, the black connector is not used, leave the rubber cap
on the black connector to prevent static from the pin grounding on the system. If you have a
multi-channel
sound card; connect the green connector from the subwoofer into the green jack on the computer and
connect the black connector from the speaker into the black jack on the computer. If you have a
portable
computer; connect the green connector from the subwoofer into the headphone jack on the computer, the
black connector is not used, leave the rubber cap on the black connector to prevent static from the pin
grounding on the system.
Step 2 Plug the orange connector from the right/control satellite into the orange jack on the subwoofer.
Step 3 Plug the brown connector from the left satellite into the brown jack on the subwoofer.
Step 4 Plug the AC plug into the wall outlet.
Step 5 Turn on the speaker set and adjust the volume accordingly.
To Next Page
Loading...
