Need help?Do you have a question about the Harman Kardon HK6950R and is the answer not in the manual?
General| Type | Integrated Amplifier |
|---|---|
| Power Output | 100 watts per channel into 8Ω (stereo) |
| Number of Channels | 2 |
| Frequency Response | 0.5Hz to 150kHz |
| Total Harmonic Distortion | 0.08% |
| Input Sensitivity | 0.12mV (MC), 2.2mV (MM), 135mV (line) |
| Signal-to-Noise Ratio | 76dB (MC), 80dB (MM), 84dB (line) |
| Channel separation | 55dB (line) |
| Dimensions | 443 x 134 x 398mm |
| Weight | 12.7kg |
| Phono Input | Yes |
| Tone Controls | Bass, Treble |
| Loudness Control | Yes |
| Speaker load impedance | 4Ω to 16Ω |
Procedures for removing various PC boards like phono, control, and driver boards.
Procedure for adjusting the phono driver circuit.
Procedure for adjusting the idling current.
Describes front panel controls for power, indicators, and audio features.
Includes loudness, subsonic filter, tone defeat, and headphone jack.
Controls for tone adjustment, balance, and preamplifier bypass.
Functions for volume, source, recording, tape monitoring, and speaker selection.
Schematics for Phono (PCB-1) and Control (PCB-3) boards.
Schematics for Driver (PCB-4) and Main Power Supply (PCB-9) boards.
Circuit diagrams for power, phono, function, and tone control sections.
Diagrams illustrating power connections and wiring between circuit boards.
To Next Page