Need help?Do you have a question about the Harman Kardon HK720 and is the answer not in the manual?
General| Drive method | Belt Drive |
|---|---|
| Motor | DC servo motor |
| Overhang | 15mm |
| Output | 2.5mV |
| Power Supply | AC 120V, 60Hz |
| Speeds | 33 1/3 and 45rpm |
| Platter | Aluminum die-cast |
| Cartridge | Magnetic type |
| Tonearm | Static balanced S-shaped tonearm |
Identify and check all included parts from the packing cushion.
Steps for mounting the platter, mat, and drive belt.
Attaching the dust cover hinges to the turntable body.
Guide for wiring the cartridge and attaching it to the headshell.
Using the tracking gauge to set stylus overhang and headshell angle.
Procedure to balance the tonearm and set tracking force.
Connecting audio outputs and power cord to the amplifier and outlet.
Instructions for selecting speed, playing, and stopping records.
Advice on dust cover use, placement, and avoiding objects.
How to clean the turntable base and dust cover properly.
To Next Page
