Harman Kardon HKTS 5 - Safety Information

3
Use the supplied RCA-type patch cord to
connect the line-level SUB or LFE output on
your receiver or amplifier to the SUB input
on the SUB-TS5 or SUB-TS6 subwoofer.
Connect the satellite and center speakers to
the corresponding speaker terminals on your
receiver or amplifier.
Make sure that you have configured your
surround sound processor for “Subwoofer
On.”The front left,front right, center and
rear speakers should all be set to “Small.”
When all connections have been made, plug
the AC power cord on the subwoofer into
an AC outlet.
Receiver
SUB/LFE
Out
Left
Front
Left
Rear
Right
Front
Right
Rear
SUBTS5/TS6
Subwoofer
Center
Line-Level
SUB Input
Right
Surround
Right
Front
Left
Surround
Left
Front
Center
– +
– +
– +
– +
– +
SPEAKER CONNECTIONS
HKTS5/HKTS6 harman/kardon