To Next Page
C
Clarence WatkinsJul 27, 2025
What to do if one Harman Kardon Subwoofer speaker has no sound?
- KKristopher NortonJul 27, 2025
If there is no sound coming from one of your Harman Kardon Subwoofer speakers, you can try the following: * Check the “Balance” control on your receiver/amplifier. * Ensure all wires and connections between the receiver/amplifier and speakers are properly connected. * Make sure that none of the speaker wires are frayed, cut, or punctured, and that no wires are touching each other. * In Dolby Digital or DTS mode, ensure that the receiver/processor is configured so that the speaker in question is enabled. * Turn off all electronics and switch the problematic speaker with a working one. If the problem stays in the same place, the issue is likely with your receiver or amplifier. If the problem follows the speaker, further assistance may be needed.
General
