DC IN
24V 5A
120W
ANALOG/
DIGITAL
IN
AUX IN
SUBWOOFER
OUT
VIDEO OUT
S-VIDEO
ANTENNA
FM75 Ω
rear-PaneL COnneCTIOnS
DC Power Input: After making all other connections, plug
in the power supply. Plug the included region-specific power
cord into the power supply and into an unswitched wall outlet.
Analog 1/Optical-Digital Auxiliary Audio Input:
Connect either the stereo mini-plug cable or the optical-digital
audio cable (both cables included) here, and connect the other
end of the cable to a source device, such as a portable CD
player. Connect the stereo mini-plug cable only to the player’s
line-level analog audio output or headphone jack, and connect
the optical cable only to an optical-digital audio output. Select
the Analog 1 or Digital Audio source.
Auxiliary Analog 3 Audio Input: Connect one end
of a two-lead analog audio RCA-type interconnect cable (not
included) here, and connect the other end to the analog-audio
outputs on a source device, such as a tape deck.
Subwoofer Output: Connect this low-pass filtered output
to a powered subwoofer (not included) for improved low-fre-
quency (bass) reproduction.
Composite and S-Video Outputs: Connect either
of these outputs to a TV or video display for viewing videos or
photos stored on a compatible iPod that supports video brows-
ing. As of this writing, only the iPod nano 3rd generation, iPod
classic and iPod 5th generation models support video browsing.
No other displays are available through these outputs.
FM Antenna Terminal: Connect the included FM antenna
wire here.
DC Power Input
ANALOG 1/OPTICAL-
DIGITAL AUXILIARY
AUDIO INPUT
FM ANTENNA
TERMINAL
SUBWOOFER
OUTPUT
AUXILIARY ANALOG
AUDIO INPUT
S-VIDEO
OUTPUT
VIDEO
OUTPUT
0129CSK - MS-100 OM Inlay_v2.indd 6 21/04/09 10:07:36
To Next Page
Loading...