15 TECHNICAL SPECIFICATIONS
Technical Specifications
Power Output
Standard Operation 8 x 45 watts @ 8 ohms, 20Hz – 20kHz,<0.07% THD, all channels driven
Bridged Mode 1 2 x 100 watts plus 4 x 45 watts @ 8 ohms, 20Hz – 20kHz, <0.07% THD, all channels driven
Bridged Mode 2 4 x 100 watts @ 8 ohms, 20Hz – 20kHz,<0.07% THD, all channels driven
High-Current Capability
±45 amps
Frequency Response <1Hz – 200kHz, ±3dB at 1 watt
Signal-to-Noise Ratio 110dB at rated power 45 watts
THD/IMD Less than 0.07% at rated output
Input Impedance 47K ohms
Input Sensitivity 1 volt for rated output
Remote Trigger Voltage 3 – 30 volts AC/DC
Remote Trigger Impedance 20K ohms
Keypad IR Sensor DC Supply 12V, 10mA
Dimensions (H x W x D) 7-5/16" x 17-3/8" x 18-5/16"
185mm x 442mm x 465mm
Weight 47 lb/21.4kg
Power Requirements 120VAC, 50Hz/60Hz
520 watts, maximum
To Next Page
Loading...
