Need help?Do you have a question about the Harman Kardon PA 2000 and is the answer not in the manual?
General| Brand | Harman Kardon |
|---|---|
| Model | PA 2000 |
| Category | Amplifier |
| Language | English |
Lists key features of the PA 2000 bridgeable multichannel amplifier, highlighting its capabilities and design.
Covers essential safety measures including line voltage, circuit capacity, cord handling, and cabinet safety to prevent hazards.
Provides guidance on safe placement, ventilation, cleaning, moving, and unpacking of the amplifier.
Explains the function of the power switch and the power, standby, and protect indicators on the front panel.
Details the RCA input jacks for audio sources and output jacks for daisy-chaining amplifiers.
Covers power control switches, trim controls, bridge switch, and AC power input for amplifier configuration and operation.
Describes the terminals for connecting Channel 1 and Channel 2 speaker outputs, including bridged mode connections.
Explains how to connect the PA 2000 for automatic turn-on using manual switch, low-voltage trigger, or music sense detection.
Details configuring the amplifier for automatic turn-on via low-voltage trigger or music sense input signals.
Guides on connecting speakers for multiroom applications using two separate pairs of outputs.
Explains how to bridge the amplifier for a single, high-power stereo output, including speaker connection details.
Provides detailed instructions on selecting and connecting speaker wire, including terminal types, polarity, and cable management.
Details how to connect audio sources like AV receivers or processors to the amplifier's input jacks.
Explains the procedure for connecting the AC power cord to the amplifier and the wall outlet, with safety notes.
Describes the three ways the PA 2000 can be turned on: manual, trigger, or music sense, based on switch settings.
Explains how to use the output level trim controls to adjust channel output levels for system balancing or remote rooms.
Guides users on obtaining service assistance, contacting Harman Kardon, and preserving warranty information.
Explains the Protect mode, its causes (shorted wires, DC voltage, overload), and the action to take when the Protect Indicator lights.
Provides common causes and solutions for issues like the amplifier not turning on or having no audio output.
Lists detailed technical specifications including power output, frequency response, signal-to-noise ratio, and dimensions.
To Next Page