To Next PageTo Next PageHow to increase bass on Harman Kardon Subwoofer?
If the bass output from your Harman Kardon Subwoofer isn't loud enough, try these solutions: * Turn up the subwoofer's volume using the remote control. * Move the subwoofer to a corner of the room. * Move the subwoofer closer to where you are sitting.
What to do if there is no sound from Harman Kardon Subwoofer?
If there's no sound coming from your Harman Kardon Subwoofer, make sure to check the following: 1. Verify that the Subwoofer Volume Control is not turned all the way down using the remote control. 2. Ensure the wireless connection is active (a constant blue LED on the back of the subwoofer indicates this). If the LED is flashing blue, restart the pairing process. 3. Try moving the subwoofer closer to the soundbar, keeping in mind that the maximum wireless operation distance is 50 feet (15.3 m).
Why is there no sound from my Harman Kardon Subwoofer and soundbar?
If there is no sound coming from both the soundbar and the subwoofer, please check the following: * Ensure the soundbar is ON (the Power Indicator should be white). * Verify the cable connecting the TV or other source component to the soundbar is properly connected at both ends. * Confirm the soundbar's Source Selector is set to the correct source and that source is playing an audio signal. * Make sure the system is not muted. If it is, press the volume buttons to un-mute it. * Check that the soundbar's volume isn't turned all the way down (the lowest setting of the Volume Down button will mute the system).
Why does my Harman Kardon soundbar volume reset when turned on?
This is an inbuilt feature of the soundbar. If the Harman Kardon soundbar is playing at more than 50 percent of maximum volume and the power is turned off, the volume of the soundbar is automatically reset to 50 percent of the maximum volume when the system is turned ON.
What to do if Harman Kardon Subwoofer does not turn on?
If the Harman Kardon subwoofer does not turn on, check the following: * Ensure the subwoofer’s power cord is plugged into a working AC outlet. * Press the Power switch on the subwoofer. * Check if the subwoofer’s AC fuse has blown. See Subwoofer Rear Panel Controls.
How to fix Harman Kardon soundbar that won't turn on?
Check if the soundbar power supply’s AC cord is plugged into a working AC outlet and that the power supply is plugged into the soundbar.
Why does my Harman Kardon SB26 turn on when I turn off my TV?
If your TV is ON and your Harman Kardon SB26 is in Standby, and switching off your television turns your SB26 ON, this is related to an issue on some televisions having a wrong Hot Plug Detection (HPD) protocol. You can activate/deactivate HPD protocol by pressing the Volume – and Surround buttons simultaneously.
General| Type | Soundbar |
|---|---|
| Total Power Output | 120W |
| Subwoofer | Wireless |
| HDMI Output (ARC) | 1 |
| Digital Optical Input | 1 |
| Analog Audio Input | 1 |
| Channels | 2.1 |
| Subwoofer Dimensions | 240 x 240 x 318 mm |
| Inputs | Bluetooth, Optical, Analog |
