How to increase bass on Harman Kardon Sabre SB 35?
If your Harman Kardon Speakers' bass output isn't loud enough, ensure the subwoofer volume isn't at its minimum. You can increase it using the remote control. Try positioning the subwoofer in a corner of the room or closer to where you're seated.
General| Audio decoders | - |
|---|---|
| RMS rated power | - W |
| Audio output channels | 5.1 channels |
| Crossover frequency | 43 Hz |
| Soundbar speaker RMS power | 20 W |
| Signal-to-Noise Ratio (SNR) | 104 dB |
| Tweeter diameter (imperial) | 1 \ |
| Full-range driver diameter (imperial) | 1.75 \ |
| Subwoofer type | Active subwoofer |
| Subwoofer included | Yes |
| Cables included | AC, HDMI, Optical |
| Receiver included | No |
| Product color | Black |
| Channels quantity | 8 channels |
| Docking connector type | Not supported |
| Package type | Box |
| Connectivity technology | Wired & Wireless |
Weight and Dimensions| Depth | 32 mm |
|---|---|
| Width | 1150 mm |
| Height | 110 mm |
| Soundbar weight | 2600 g |
| Subwoofer depth | 86 mm |
| Subwoofer width | 390 mm |
| Subwoofer height | 460 mm |
| Subwoofer weight | 5800 g |
Controls for power, volume, muting, and input source selection.
Explains how to pair the system with Bluetooth-enabled devices.
Adjusts crossover, phase, and manages wireless pairing status.
Controls for power, volume, muting, and input source selection.
Steps for wirelessly streaming audio from a Bluetooth-enabled device.
Solutions for soundbar/subwoofer not turning on and no sound.
Troubleshooting for distorted sound, low bass output, and soundbar reset.
To Next Page
