Need help?Do you have a question about the Harman Kardon AURA STUDIO 4 and is the answer not in the manual?
General| Signal-to-Noise Ratio | 80dB |
|---|---|
| Bluetooth Version | 5.2 |
| Bluetooth Profile | A2DP 1.3, AVRCP 1.6 |
| Bluetooth Transmitter Power | <10dBm |
| Bluetooth Transmitter Modulation | GFSK, π/4 DQPSK, 8DPSK |
| Water Resistance | No |
| Color Options | Black, White |
| Power Supply | 100-240V, 50/60Hz |
| Transducers | 1 x 4.5" (114mm) woofer, 6 x 1.5" (38mm) full-range transducers |
| Frequency Response | 45 Hz - 20 kHz (-6dB) |
| Bluetooth Transmitter Frequency Range | 2.402GHz - 2.480GHz |
Press the power icon to activate the speaker.
Connect your device to the speaker via Bluetooth settings.
Adjust music volume using the '+' and '-' buttons.
Connect up to two devices to the speaker concurrently.
Play music via audio cable; ensure Bluetooth is disconnected.
Adjust the brightness of the speaker's illumination.
Lighting effects synchronize with music playback for dynamic ambiance.
Press and hold +, -, and icons for over 5 seconds to disable the feature.
Detailed technical specifications including Bluetooth version, power, and dimensions.
To Next Page