Need help?Do you have a question about the Harman Kardon SIGNATURE 2.1 and is the answer not in the manual?
General| Number of channels | 2.1 |
|---|---|
| Input Sensitivity | 200mV |
| Power Output | 100W per channel into 8 Ohms |
| Frequency Response | 20Hz to 20kHz |
| Input Impedance | 47k Ohms |
| Inputs | RCA |
| Outputs | Speaker terminals |
| Power consumption | 300W |
Ensures the amplifier is connected to the correct voltage to prevent hazards.
Recommends a 20-amp circuit for proper performance and safety.
Warns against opening the unit due to shock hazard and voiding warranty.
Guidance on proper placement for ventilation and safety.
Guidance on saving packaging and unpacking the amplifier.
Details on ensuring adequate airflow for optimal performance and safety.
Details the power switch, power indicator, and LED indicator lights.
Describes speaker outputs, audio inputs, AC power cord, and trigger input.
Details on automatic turn-on features via trigger or external converter.
Provides common problems, diagnoses, and troubleshooting hints for the amplifier.
To Next Page