Harman Kardon TD4600 - Page 11

AC Power
Plug the cord into polarized wall socket,
polarized extension cord, or AC
convenience outlet on another stereo
component.
UL FILE NO. E28148
AUDIO PRODUCT
LISTED 5960
MODEL NO.: TD4600
HARMAN KARDON SEAL NO:
WOODBURY
NEW YORK
MADE IN JAPAN
Remote Control
1. If you wish to control your deck
through an external infrared remote
sensor: connect the wire from the
remote sensor to the “Remote Input
jack on the deck.*
”
AC 120V/60Hz
|
|
2. Tocontrol the deck, you may use the
remote conirol unit supplied with your
cassette deck. Alternatively, you may
use a universal remote control unit,
such as Harman Kardon’s Master-
works,™ which can also control other
components, such as TVs, VCRs,
receivers and CD players.
Masterworks is available from your
Harman Kardon dealer.
3. Connection to other stereo
components.
(a) To control additional components
through the external sensor: run a
control wire from the “Remote
Output” jack on your deck to the
"Remote Input" jack of another
component. Continue this
process to include multiple
components.*
Even if you do not use an external
sensor: you may still wish to
connect your deck to another
component, if you have one with a
“Remote Input “jack but with no
built-in remote sensor. \|n this
case, you may use the built-in
sensor in your deck to control the
other component.*
Ss
“NOTE: Not all components are compatible. However it will not hurt to experiment.
10