Harman Kardon TU-940 - Alignment Procedures; 1. Equipment Required; 2. Alignment and Test Points

ALIGNMENT PROCEDURES
1. Equipment Required
• AM Standard Signal Generator (AM SSG.) • Audio Generator
• Oscilloscope • Distortion Meter
• AC Voltmeter • DC Voltmeter
• FM Standard Signal Generator(FM SSG.) • Frequency Counter
• Stereo Modulator
Note: Remove FM external antenna from terminal when aligning.
2. Alignment and Test Points
• Refer to Adjustment Location on page 12
Note: As a front-end (FE 101) is difficult to repair if faulty, replace it with new one.
16