Harman AMX MODERO S MST-1001 - Cutouts; MSD-1001-L;2 Cutout Dimensions; MSD-701-L;2

To Next Page

To Previous Page

Installing Wall-Mount (MSD) Panels

Modero S Series G4 Touch Panels - Installation & Hardware Reference Manual

Cutouts

1. After ensuring proper placement, cut an opening in the mounting surface for the Backbox, using the included Installation

Template as a guide. For reference purposes, the cutout dimensions for each S Series panel is indicated below:

NOTE: Consider making the actual cutout opening slightly smaller than the provided dimensions. This provides a margin of error

if the opening needs to be expanded. Too little wall material removed is always better than too much.

MSD-1001-L/2 - Cutout Dimensions

MSD-701-L/2 - Cutout Dimensions

FIG. 25 MSD-1001-L/2 Cutout Dimensions

FIG. 26 MSD-701-L/2 Cutout Dimensions

9.32" (+.01, -.00)

236.65mm (+.25, 0)

5.96" (+.01, -.00)

151.46mm (+.25, 0)

6.64" (+.01, -.00)

168.71mm (+.25, 0)

4.07" (+.01, -.00)

103.43mm (+.25, 0)

Harman AMX MODERO S MST-1001 - Cutouts; MSD-1001-L;2 Cutout Dimensions; MSD-701-L;2 - Cutout Dimensions