Need help?Do you have a question about the Harman Infinity HTS-10 and is the answer not in the manual?
General| Type | Active Subwoofer |
|---|---|
| Driver Size | 10 inches |
| Amplifier Power | 150 Watts RMS |
| Peak Power | 300 Watts |
| Enclosure Type | Bass Reflex |
| Low Pass Crossover | 50Hz - 150Hz |
| Frequency Response | 35Hz - 150Hz |
| Phase Control | 0 to 180 degrees |
Read all safety and operating instructions before operating the product.
Adhere to all warnings on the product and in the operating instructions.
Follow all operating and use instructions as provided.
Operate only from the indicated power source type; consult dealer if unsure.
Ensure proper plug fit; do not defeat polarized plug safety feature.
Ground outdoor antenna/cable system for protection against surges and static.
Unplug and disconnect antenna during lightning storms to prevent damage.
Keep antenna systems away from overhead power lines to avoid fatal contact.
Refer all servicing to qualified personnel; do not attempt self-service.
Unplug and refer for service if power cord, liquid, rain, or performance issues occur.
Use manufacturer-specified replacement parts to avoid hazards.
Request safety checks after service to ensure proper operating condition.
Detailed instructions for connecting and positioning the powered subwoofer.
Crucial safety step to turn off all audio system power before wiring.
Correctly connecting positive and negative terminals for optimal audio performance.
Overview of the subwoofer's amplifier panel controls and their functions.
Instructions for connecting the subwoofer to an unswitched AC wall outlet.
Connecting the subwoofer using a low-level signal from the receiver/processor.
Adjusting subwoofer volume for a pleasing blend with the overall system.
Setting the crossover frequency based on speaker capabilities and system configuration.
Guidance on optimal subwoofer room placement for enhanced low-frequency response.
To Next Page
