1212
a) Check that you have connected your Amazon Echo
device to your home Wi-Fi network.
b) During the Wi-Fi setup of your Amazon Echo device, you
have saved to Amazon the password of your home Wi-Fi
network.
Enter your Wi-Fi network
CONNECT
Wi-Fi Network Name
Enter your password
c) Enable Bluetooth on your Amazon Echo device, and
place the soundbar within the Bluetooth range (10 m/
33 ft).
5.3.4 **Wi-Fi setup through the Amazon Alexa app
If your soundbar is purchased elsewhere or received as a gift,
set up Wi-Fi through the Amazon Alexa app. You can have Alexa
discover the soundbar automatically, or through the guided
setup or barcode setup.
Automatic discovery
SETUP WIFI
ALEXA MUSIC READY
Amazon Alexa
*
BAR 5.0
MULTIBEAM
Purchased elsewhere or received as a gi�
*
JBL Soundbar can be set
up
LATER
CONTINUE
SCAN BARCODE
SETUP
Locate the 2D barcode for
your JBL speaker
DON’T HAVE A BARCODE
DON’T HAVE A BARCODE
SETUP
?
Connect your JBL speaker
Next
a)
Connect your Android or iOS device to your home Wi-Fi
network. Download the Amazon Alexa app. Sign in with
your Amazon account. If you do not have, create a new one.
b) On your Android or iOS device, enable Bluetooth and launch
the Amazon Alexa app.
→ The JBL soundbar is automatically discovered by
Alexa.
c) Follow the steps as shown above and onscreen instructions
to connect the JBL soundbar to your home Wi-Fi network.
Manual: Guided setup
SETUP
?
Connect your JBL
speaker to Alexa
Next
SETUP WIFI
Amazon Alexa
Amazon Alexa
DevicesDevices
*
BAR 5.0
MULTIBEAM
Purchased elsewhere or received as a gi�
*
DEVICES
Add Device
SETUP
?
Which device would you
like to set up?
SETUP
?
What brand is your
speaker?
JBL
Speaker
JBL
a)
Connect your Android or iOS device to your home Wi-Fi
network. Download the Amazon Alexa app. Sign in with
your Amazon account. If you do not have, create a new one.
b) On your Android or iOS device, launch the Amazon Alexa
app and follow the steps as shown above.
To Next Page
Loading...
Need help?
General
