www.jbl.com
English
1515
6.2.2 Dolby Atmos
®
(Virtual)
With the Virtual Dolby Atmos, enjoy height sound effects when
you play movies in the TV/HDMI IN source.
1. Connect and play your Blu-ray player or streaming device
through the HDMI ARC/HDMI eARC connector and the
HDMI connector. (See “5.1 Connection with your TV and
digital devices” in the “5. CONNECT”chapter).
2. Press on the remote control to switch on or off the
height sound effects (Default: on).
→ The screen on the soundbar shows “ ” or “
”.
ON ATMOS
OFF ATMOS
NOTES:
− Switch off the ATMOS effects, if you prefer no to have any height
sound effects during your viewing or listening.
6.2.3 Bass adjustment
You can make bass adjustment as needed.
1. On the remote control, press and hold for more than three
seconds. Then, press -.
→ Current bass level is displayed (Default: “ ”).
LVL 3
3S
x1
2. Within ve seconds, press + or - on the remote control to
switch between bass levels.
→ “ ” to “ ” is displayed.
LVL 3LVL 2LVL 1 LVL 5LVL 4
To Next Page
Loading...
Need help?
General
