JBL Charge 2+ is splash proof; submerging it in water or other liquids may result in permanent damage to the
speaker.
IMPORTANT: To ensure personal safety and successful charging, do not connect JBL Charge 2+ to any power
source while the charging port is wet, and do not expose JBL Charge 2+ to dripping or splashing while charging, as
doing so may result in permanent damage to the speaker or power source. Splash proof is defined as water
splashing against the enclosure from any direction shall have no harmful effect to the unit.
Bluetooth® version: 3.0
Support: A2DP V1.3, AVRCP V1.5, HFP V1.6, HSP V1.2
Transducer: 2 x 45mm
Rated power: 2 x 7.5W
Frequency response: 75Hz-20kHz
Signal-to-noise ratio: >80dB
Power supply: 5VDC, 2.3A USB Output: 5V, 2.1A (maximum)
Battery type: Lithium-ion polymer (3.7V, 6000mAh)
Battery charge time: 4hrs 1.8A
Music playing time: up to 12 hours (varies by volume level and audio content)
Bluetooth® transmitter power: 0-4dBm
Bluetooth® transmitter frequency range: 2.402-2.480GHz
Bluetooth® transmitter modulation: GFSK, n/4 DQPSK, 8DPSK
Dimensions: (1) 79mm x 185.2mm
Weight: 600g
Voice Logi
Voice Logic is a leading-edge voice-enhancement technology that significantly improves the clarity of voice
communications by minimizing a wide variety of background noises.
File Downloads
User Guide
HARMAN, JBL, CHARGE 2
Download [optimized]
Download
References
Bluetooth® Trademark
To Next Page
Loading...
