Harman JBL ENDURANCE PEAK - Mono mode; LED behaviour; Specifications

Quick Start Guide
Guide de démarrage rapide
8
Mono mode
Use the master earbud only and put the slave back into the charging case.
9
LED behaviour
On
Power on/off (L/R)
Slow
Low battery (L/R)
Solid
Charging (L/R)
Off
Full charging (L/R)
Fast
TWS pairing (L/R) /
Bluetooth pairing (R)
Solid
TWS connected (L/R) /
Bluetooth connected (R)
10
Specications
EN
• Model: JBL ENDURANCE PEAK
• Bluetooth version: 4.2
• Support: A2DP V1.3, AVRCP V1.5, HFP V1.6
• Headset Battery type: Lithium-ion polymer (3.7V, 85mA)
• Bluetooth transmitter power < 9.5dBm
• Bluetooth transmitter frequency range: 2.402 – 2.480GHz
• Bluetooth transmitter modulation: GFSK, π/4 DQPSK, 8DPSK
• Dynamic drivers: 5.6mm