Harman JBL LS60 - User Manual

ACOUSTIC & ELECTRICAL SPECIFICATIONS:
• Nominal Impedance 6 Ohms
• Max Amp Power 150 Watts*
• Frequency Response 40Hz – 40kHz (–10dB)
48Hz – 38kHz (–3dB)
• Sensitivity 87dB (2.83V @ 1 meter)
• Crossover Frequency 400Hz, 6dB/Octave,
2kHz, 8kHz; 24dB/Octave
SYSTEM COMPONENTS:
• Cabinet LS60 (Not for Sale)
• Grille Ass’y P08610000
• Low-Frequency Transducer Dual 6-1/2" (165mm) PolyPlas™,
shielded; U00670001
DC Resistance 11.5 Ohms, ±10%
• High-Frequency Transducer 2" (50mm) Pure-titanium
compression driver, shielded;
U00600000
DC Resistance 3.9 Ohms, ±10%
• U.H.F Transducer 3/4" (19mm) Polyester-film,
shielded; U00700001
DC Resistance 6.9 Ohms, ±10%
• Crossover Network P05750023
AURAL SWEEP TEST SPECIFICATIONS:
• System Aural Sweep Test 6.0V Input 40Hz to 20kHz
• L.F.1 Aural Sweep Test 5.0V Input 40Hz to 1kHz
• L.F.2 Aural Sweep Test 5.0V Input 500Hz to 3kHz
• H.F. Aural Sweep Test 1.0V Input 2kHz to 9kHz
• U.H.F. Aural Sweep Test 1.0V Input 7kHz to 20kHz
PHYSICAL SPECIFICATIONS:
• Dimensions 39-1/2" x 8-3/4" x 13-1/2"
(H x W x D) (1003mm x 222mm x 343mm)
• Dimensions (with feet pad) 40" x 8-3/4" x 13-1/2"
(H x W x D) (1016mm x 222mm x 343mm)
• Weight 58.6 lb/26.6kg (each)
WARRANTY:
• Refer to Warranty Statement packed with each product.
* The maximum recommended amplifier power rating will ensure
proper system headroom to allow for occasional peaks. We do not
recommend sustained operation at these maximum power levels.
34
35
38
39
36
37
PACKAGING
WIRING DIAGRAM
LS60 SCHEMATIC
Technical Manual
LS60
LS60
7/08
Harman Consumer Group, Inc., 250 Crossways Park Drive, Woodbury, New York 11797
Release Date 2008
Discontinued Date XXXX
Legend on Page 2
.205
.205
.205
.205
L.F.1
H.F.
U.H.F.
L.F.2
C1
6.8μF
100v
C3
11μF
100v
C7
3.3μF
100v
C10
22μF
100v
C9
7.5μF
100v
C11
0.01μF
100v
C8
0.01μF
100v
C12
4.7μF
100v
C14
1.1μF
100v
C15
1.5μF
100v
C13
0.01μF
100v
C2
1.5μF
100v
C4
0.01μF
100v
C5
12μF
100v
C6
0.01μF
100v
L1
7.5mH
L2
2.0mH
L4
0.33mH
L5
0.18mH
L6
0.08mH
L3
1.1mH
R2
15Ω
10W
R3
3.9Ω
10W
R5
9.1Ω
5W
R4
2.7
Ω
10W
R1
51Ω
10W
L.F. INPUT
.110
.110
Orange 500mm
Black 500mm
Yellow 500mm
Black 500mm
H.F. INPUT
Black 450mm
Black 450mm
White 450mm
Green 450mm
.110
.110
Blue +
Black -
Red +
Black -
Black +
Orange -
UHF TRANSDUCER
U00700001
HIGH-FREQUENCY
TRANSDUCER
U00600000
LOW-FREQUENCY
TRANSDUCER 2
U00670001
CROSSOVER NETWORK
P05750023
Black +
Yellow -
White +
Green +
Black -
Black -
LOW-FREQUENCY
TRANSDUCER 1
U00670001

Summary

LS60 Specifications

Acoustic & Electrical Specifications

Details on impedance, power, frequency response, sensitivity, and crossover frequency.

Aural Sweep Test Specifications

Test parameters for speaker sweep tests across various voltage and frequency inputs.

Physical Specifications

Dimensions and weight of the loudspeaker system.

Warranty & Recommendations

Product warranty statement and amplifier power recommendations.

LS60 Diagrams and Schematics

Wiring Diagram

Visual representation of electrical connections for speaker components.

LS60 Schematic

Detailed circuit diagram of the LS60 crossover network and component connections.

Exploded View and Parts List

Exploded View

Illustrated breakdown of the LS60 speaker system components.

Parts List

Comprehensive list of part numbers, descriptions, and quantities for LS60 components.

Service Notes

Woofer & Crossover Access

Instructions for accessing the woofer and crossover network for service.

HF;UHF Section Access

Procedure for accessing the HF/UHF drivers and faceplate.

Woofer Replacement Guidance

Specific advice for replacing a woofer to ensure proper trim ring fit.

Harman JBL LS60 Specifications

General

Brand	Harman
Model	JBL LS60
Category	Industrial Equipment
Language	English