Harman JBL Professional BRX 300 Series - BRX308-PM Storage

14
JBL BRX300 SERIES
BRX308-PM STORAGE
You can store two BRX308-PM kits in the BRX308-ACC top lid for easier pack and transport.
1. Flip the top lid upside down so the at surface is on the oor.
2. Slide the poles in the sleeves as shown in Figure 9, with the threaded portion of the pole going in rst.
3. Release the two front QRP’s on the pole adapter frame and slide into place as shown in Figure 10.
4. Insert the QRP’s through the clamps to lock the adapter in place as shown in Figure 11. The adapter holds the
poles in place and prevents them from sliding out during transport.
Figure 9 Figure 11Figure 10
ACCESSORIES