Harman JBL Professional BRX 300 Series - BRX308-LA Dual 8 2-Way Line Array Element; BRX325 SP Dual 15 Subwoofer Housing DSP & Amplifier Module

8
JBL BRX300 SERIES
PRODUCT INFORMATION
BRX308-LA Dual 8” 2-Way Line Array Element
The BRX308-LA combines 2 x 8” woofers with a single 3” high
frequency compression driver mounted to a purpose-built planar
waveguide that is derived from JBL Professional’s deep technology
expertise and experience with loudspeaker design.
BRX325SP Dual 15” Subwoofer Housing DSP & Amplier
Module
The BRX325SP uses 2 x 15” subwoofer transducers with ports
designed to extend low frequency response and increase eciency of
the system.
The BRX325SP ships with 4 heavy-duty castors installed on its back
that enables ease of transport while also protecting the amplier module
connectors and switches.
The BRX325SP has a rigging system that allows up to 4 x BRX308-LA
to be mounted onto it for ground stacked applications.
Additionally, a pole mount cup allows for up to 2 x BRX308-LA to be
pole mounted onto the subwoofer using components from the optional
BRX308-PM System.
The subwoofer also houses the DSP and amplier module that powers
the entire system.
The BRX308-LA has a simple yet highly ecient
rigging system that allows a lot of options to optimize
audience coverage whether used in ground stacked,
pole mounted or own conguration. Available inter-
enclosure angles are 0, 1, 2, 3, 4, 5, 6, 8, 10 and 12°.
Each BRX308-LA has 2 x Neutrik NL4 connectors
wired in parallel and can be used as system input or
as a pass through connection for daisy-chaining up to
2 cabinets in parallel for amplication with the power
module built in the BRX325SP subwoofer system.