Potential scrap of material
Process Step Material BOM number
Step4 BT antenna 423010370109
Step 5 Cloth grille 331105180109(black)
331105180209(grey)
Step7 EVA 419200290109
Step8-2 Diffuser 25105180401029(Black)
25105180901029(grey)
Step12 Core body 25105181001029(Black)
25105181002029(grey)
Step13-2 USB board 993105180209
Step13-2 AUX board 993105180309
Step14 Key board 993105180509
Step15-1 Speaker 20160150100002
Step15-2 Rubber pad 420298000109
9
Note:
1. pls make sure all the location where need to be fixed by screws must be evenly and tightly
2. After reassembly, try to press one passive radiator and observe the other one if it can stand up or take more than 10s to recover flat. If yes, it
should be OK if
you have no special sealing equipments to test
3. Before testing the glue Should be held for 4 hours to wait for drying
To Next Page
Loading...
Need help?
General
