Need help?Do you have a question about the Harman JBL SRX815P and is the answer not in the manual?
General| Coverage Pattern | 90° x 50° |
|---|---|
| Power Rating | 2000W Peak |
| Output Connectors | XLR |
| System Type | Powered Full-Range Speaker |
| Amplifier Design | Class D |
| Type | Powered Full-Range Speaker |
| LF Driver | 1 x 15" woofer |
| HF Driver | 1 x 1.5" compression driver |
| Input Connectors | XLR/1/4" combo jack |
Covers powering on, connecting inputs, and setting output levels.
Details system type, SPL, frequency range, and response.
Covers power rating, input impedance, and gain levels.
Lists LF drivers and crossover frequency.
Details the JBL 2432H 3” voice-coil Compression Driver for high frequencies.
Control via Audio Architect and SRX Connect app using Ethernet.
Describes JBL's Differential Drive® Technology ferrite drivers for low frequencies.
Details onboard DSP features like PEQs, delay, signal generators, and presets.
Explains the SRX835's midrange driver derived from VTX touring systems.
Explains Crown DriveCore technology, power, and signal-to-noise ratio.
Navigating and adjusting input levels and sensitivity settings.
Accessing system settings like Presets, Auto Dim, Auto Sleep, and Meters.
Chart detailing preset usage for different SRX speaker and subwoofer combinations.
Details direct, wired, and wireless connection methods for network control.
Using Audio Architect software for DSP control and configuration.
To Next Page