Harman JBL Vibe 200 TWS User Manual

BT connecting
BT connected
BT not connected
(BLue)
(BLue)
(BLue)
factory reset
(Blue/
white)
Low (RED)
(GREEN)
(ORANGE)
high
mid
Low (OFF)
(WHITE)
(WHITE)
high
mid
power
on &
CONNECT
ON
1
2
fully charged
Charging
(red orange
GREEN)
Stereo Mode
rL L/R
Mono Mode
DUAL CONNECT
1
2
quick
start
guide
Charging
TECH
SPEC
Choose "JBL VIBE200TWS" to connect
Settings Bluetooth
Bluetooth
DEVICES
Now Discoverable
Connected
JBL VIBE200TWS
Manual Controls
RECONNECT LEFT & RIGHT Factory resetConnect to a new Bluetooth device
up to
L/R L/R
led behaviors
WHAT’S
IN THE
BOX
how
to
wear
FIRST
TIME
USE
TAP × 1
HOLD (2
S)
TAP × 2
TAP × 3
HOLD (5S)
TAP × 3
TAP × 1
TAP × 2
L R
Bluetooth
BUTTON COMMAND
S / m / l
1
Try different sizes of eartips for best fit and seal.
2
S / M / L
1. Stereo Mode
2. Mono Mode
L R
Seamless
automatic
switch
Siri
®
/GOOGLE Assistant/Bixby Siri
®
/GOOGLE Assistant/Bixby
R
Siri
®
/GOOGLE Assistant/Bixby
power off
L+R
HOLD (5S)
Model: VIBE200TWS
Driver size: 8 mm/ 0.315” Dynamic Driver
Power supply: 5 V
1 A
Weight:
47.5 g/ 0.105 lbs
Headset battery type: Lithium-ion Battery (48 mAh/ 3.7 V)
Charging case battery type: Lithium-ion Battery(500 mAh/ 3.7 V)
Charging time: 2 hrs from empty
Music playtime with BT on: up to 5 hrs
Frequency response: 20 Hz – 20 kHz
Impedance: 16 ohm
Sensitivity:
108 dB SPL@1 kHz
Maximum SPL: 93 dB
Microphone sensitivity: -38 dBV/Pa @1 kHz
Bluetooth version: 5.0
Bluetooth profile version:
A2DP V1.3, AVRCP V1.6, HFP V1.7
Bluetooth transmitter frequency range: 2.400 GHz - 2.4835 GHz
Bluetooth transmitter power: 12 dBm
Bluetooth transmitter modulation: GFSK, π/4 QPSK, 8DPSK
Maximum operation temperature: 45°C

Harman JBL Vibe 200 TWS Specifications

General

Driver Size	8 mm
Charging Time	2 hours
Bluetooth Version	5.0
Water Resistance	IPX2
Frequency Response	20 Hz - 20 kHz
Impedance	16 ohms
Sensitivity	108 dB SPL@1 kHz
Bluetooth transmitter power	<10 dBm
Bluetooth transmitter modulation	GFSK, π/4 DQPSK, 8DPSK
Weight	47.5 g
Colors	Black, White, Blue, Purple
Music playtime with BT on	5 hours
Microphone sensitivity	-38 dBV@1 kHz/Pa
Bluetooth profiles	A2DP, AVRCP, HFP
Bluetooth transmitter frequency range	2.4 GHz - 2.4835 GHz

Summary

What's in the Box

How to Wear and First Time Use

Power On and Connect

Dual Connect Modes

Stereo Mode

Connects both earbuds for stereo sound output.

Mono Mode

Connects one earbud for mono sound output.

Button Commands

Stereo Mode Commands

Controls for music, calls, and voice assistant in stereo mode.

Mono Mode Commands

Controls for music, calls, and voice assistant in mono mode.

Power Off and Manual Controls

Power Off

Instructions for powering down the earbuds.

Connect New Bluetooth Device

Steps to pair with a new Bluetooth device.

Reconnect Left & Right

Procedure for re-establishing connection between earbuds.

Factory Reset

Guide to resetting earbuds to factory default settings.

Charging and LED Behaviors

Charging Guide

Information on charging the earbuds and case.

LED Status Indicators

Explanation of LED light patterns and their meanings.

Technical Specifications