12/11
IMPORTANT: THIS IS DATED INFORMATION. When requesting service or replacement parts for
your appliance please provide model number and serial number. All parts listed in this manual may
be ordered from an authorized dealer.
9.1 Feeder Motor Cover 2-00-00052P
Pusher Block Assembly (w/Tube & Threaded Rod) 1-10-00099
9.2 Pusher Block Adjuster Tube 1-10-00050P
9.3 5/16-18 Zinc Plated Cold Forged Wing Nut Pkg of 25 3-30-8012-25
9.4 Pusher Block Adjuster Rod Pkg of 2 2-00-08011-2
9.5 Pusher Block 3-50-00026
9.6 Cam Block Assembly 1-10-00102A
Feeder Cam Block 3-50-00054
Cam Bearing 3-31-3014
9.7 Cam Arm Cover 2-00-00053P
9.8 Fines Tray 2-00-00055
9.9 Feed Indicator Hardware 1-00-00056
Capacitor Holder Kit - uses 3 AMP Slow Blow Fuse 3-20-36533
9.10 Feeder Body Weldment 1-10-00687
9.11 Clean-Out Slide 2-00-00048P
9.12 Gasket 1” White w/Adhesive (Feeder Gasket) 10 FT 1-00-88100
9.13 Grate Holder Assembly 1-10-01000
Gasket Hd Rope (Grate Holder) 5 Ft 1-00-43375
9.14 Grate Inserts Qty. 2. Req. 4-00-00046D
9.15 Grate Angle - Cast 3-00-00218
9.16 Pillow Block - 3/4” Flange 3-31-324122
9.17 Pusher Arm Weldment 1-10-00025
9.18 Gearmotor - 1/80 HP-4.5 RPM 3-20-60075
9.19 Capacitor 370 Vac Motor Run 3-20-69654
9.20 Feed Motor Mount 1-10-00031P
Additional service part numbers appear on following page.
To Next Page
Loading...
