15
N
0
585 / N
0
585.5 INTEGRATED AMPLIFIER / OWNER’S MANUAL
ENGLISH
SPECIFICATIONS
PHONO STAGE (N
0
585.5 ONLY)
Riaa Frequency Response: 20Hz to 20kHz, ±0.3dB
Infrasonic Filter: Defeatable, 15Hz, 2nd order (12dB/octave)
Moving Magnet Mode:
Input Resistance: 47kΩ
Input Capacitance: Selectable; 50, 100, 150, 200, or 680pF
Gain: 40dB @ 1kHz
Total Harmonic Distortion
Plus Noise:
<0.03%, 20Hz to 20kHz, 2VRMS output
Signal-To-Noise Ratio
(Referred To 2Vrms Output):
>97dB (20Hz to 20kHz, wideband, unweighted)
>102dB (A-weighted)
>110dB @ 20Hz to 20kHz (spot noise)
Maximum Input Level: >95mV @ 1kHz; >285mV @ 20kHz
Moving Coil Mode:
Input Resistance: Selectable; 20, 33, 50, 66, 100, 200, 330, 500, 1000, or 47kΩ
Input Capacitance: 50pF
Gain: Selectable; 50, 60, or 70dB @ 1kHz
Total Harmonic Distortion
Plus Noise:
50dB gain setting: <0.02%, 20Hz to 20kHz, 2VRMS output
60dB gain setting: <0.02%, 20Hz to 20kHz, 2VRMS output
70dB gain setting: <0.04%, 20Hz to 20kHz, 2VRMS output
Signal-To-Noise Ratio
(Referred To 2Vrms Output):
50dB gain setting: >87dB (20Hz to 20kHz, wideband, unweighted) 50dB gain setting: >94dB (A-weighted)
50dB gain setting: >100dB at 20Hz to 20kHz (spot noise)
60dB gain setting: >77dB (20Hz to 20kHz, wideband, unweighted) 60dB gain setting: >84dB (A-weighted)
60dB gain setting: >90dB at 20Hz to 20kHz (spot noise)
70dB gain setting: >68dB (20Hz to 20kHz, wideband, unweighted) 70dB gain setting: >74dB (A-weighted)
70dB gain setting: >80dB at 20Hz to 20kHz (spot noise)
Maximum Input Level: 50dB gain setting: >30mV @ 1kHz; >105mV @ 20kHz
60dB gain setting: >9.5mV @ 1kHz; >90mV @ 20kHz
70dB gain setting: >3.2mV @ 1kHz; >30mV @ 20kHz
To Next Page
Loading...
