To Next PageTo Next Page
Need help?Do you have a question about the Harman crown DSi Series and is the answer not in the manual?
General| Input Sensitivity | 1.4V |
|---|---|
| Channels | Varies by model (DSi 1000, DSi 2000, etc.) |
| Signal to Noise Ratio | >100 dB |
| THD | <0.05% |
| Input Impedance | 20 kOhm balanced, 10 kOhm unbalanced |
| Cooling | Variable speed fan |
| Connectors | Input: XLR |
| Power Output | Varies by model (see above) |
| Frequency Response | 20 Hz - 20 kHz |
| Total Harmonic Distortion | <0.05% |
| Protection | Thermal, short circuit, DC |
Warning about potential magnetic field interference with sensitive equipment due to high power density.
Statement regarding the device's compliance with FCC rules and potential interference.
Lists the key features of the Crown DSi Series power amplifiers.
Provides guidance on how to effectively use the operation manual.
Instructions for unpacking and inspecting the amplifier for transit damage.
Steps for installing the amplifier in an equipment rack or stacking it.
Guidelines for maintaining adequate airflow and ventilation for the amplifier.
Detailed wiring diagram for connecting DSi amplifiers to the DSi-8M Monitor Panel.
Recommendations for selecting input wiring and connectors, including balanced and unbalanced options.
Guidance on selecting appropriate speaker wire and connectors, including gauge and type.
Instructions for wiring the system, covering Dual Mode and Bridge-Mono Mode.
Procedures for safely connecting the amplifier to the AC power source.
Advice on preventing speaker damage from clipping and subsonic signals.
Step-by-step guide for safely powering on the amplifier for the first time.
Important safety and operational precautions to ensure proper amplifier function and longevity.
Overview of the front panel controls, buttons, LCD screen, and indicator LEDs.
Description of connectors and ports found on the back panel of DSi 1K, 2K, and 4K models.
Description of connectors and ports found on the back panel of the DSi 6K model.
Details various protection mechanisms including output current limiting, DC offset detection, and thermal management.
Explains how to use and configure digital signal processing presets, filters, EQ, delay, and limiting.
Guides users through diagnosing and resolving common amplifier problems like no sound, distorted sound, or no power.
Procedures for obtaining service for products purchased in Canada and internationally.
Details methods for obtaining service in the US, including authorized centers and factory depot.
