To Next PageTo Next Page
Need help?Do you have a question about the Harman JBL Club A600 and is the answer not in the manual?
General| Amplifier Class | D |
|---|---|
| Number of Channels | 1 |
| Power Output @ 2 Ohms | 600W RMS |
| Power Output @ 4 Ohms | 300W RMS |
| Frequency Response | 10Hz - 320Hz |
| THD+N at Rated Power | <1% |
| Signal-to-Noise Ratio | >80dB |
| Input Sensitivity, Low Level | 0.2V - 2V |
| Crossover Frequency | 32Hz - 320Hz |
| Operating Voltage | 9V - 16V |
| Low Pass Crossover | 32Hz - 320Hz |
| Bass Boost | 0dB - 9dB @ 45Hz |
Guide to accessing the amplifier's connection and control interfaces.
Instructions and recommendations for securely mounting the amplifier.
Guidance on connecting low-level and high-level audio input signals.
Instructions for linking two amplifiers for increased power output.
Procedures for adjusting gain, crossover frequency, phase, and bass boost.
Diagnosing problems when no audio is present and indicator lights are off or flashing.
Troubleshooting blown fuses, distorted audio, and lack of audio dynamics.
Resolving engine-related noise and improving audio punch and clarity.
