Harman® • P42i Pellet Insert Installation Manual • 2023 -___ • 08/2327 8742-901D
G. Wireless Room Sensor
The Wireless Room Sensor was exclusively designed to
communicate with the EASY Touch Controls on Harman
pellet products. Simply place the wireless sensor up to
30feetaway,andenjoythewarmth ofpelletheatexactly
whereyouwantit.TheWirelessRoomSensormountsona
wall wherever you want your heat measured.
The Wireless Room Sensor keeps your space within 1
degreeofyoursettemperature.SimplysynctoyourEASY
TouchControl(which takesabout20seconds)andinstall
with the provided screws.
Smart Features:
• After a power outage, the wireless room sensor resets
the controls to the current time, allowing your heat
schedule to resume automatically.
• Communicates to the EASY Touch Control every 17
seconds, keeping your set temperature as accurate as
possible, all day, every day.
• Easily mount up to 30 feet away from the stove or insert
onanyinteriorwall(mountinghardwareincluded).
• We provide twoAA batteries with a life expectancy of
more than a year.
• Trackconnection strength andbattery levels onEASY
TouchControlDiagnosticpage6(Locatedonunit).
• Low Battery Warning messages will be seen on the
home screen.
• If connection is lost due to a dead battery the stove
continues operation by automatically switching to its
back-up sensor when the batteries are dead, and will
display a “replace batteries” message on the home
screenoftheEASYTouchControl).
The Wireless Room Sensor has light indicators to
communicatethefollowing:
• AgreenLEDasheswhengoodcommunicationismade
to the display.
• AnamberLEDasheswhensearching.
• A red LED ashes when searching in energy saving
mode – this may occur when the appliance has been
unplugged,orisexperiencinganextendedpowerloss.
To Next Page
Loading...
