Need help?Do you have a question about the Harman Tune 230 NC TWS and is the answer not in the manual?
General| Driver Size | 6 mm |
|---|---|
| Frequency Response | 20 Hz - 20 kHz |
| Sensitivity | 105 dB SPL@1 kHz |
| Microphone Sensitivity | -38 dBV/Pa@1 kHz |
| Bluetooth Version | 5.2 |
| Bluetooth Transmitter Frequency Range | 2.4 GHz - 2.4835 GHz |
| Bluetooth Transmitter Power | < 12 dBm |
| Bluetooth Transmitter Modulation | GFSK, π/4 DQPSK, 8DPSK |
| Charging Time | 2 hours |
| Music Playtime (ANC Off) | 10 hours |
| Music Playtime (ANC On) | 8 hours |
| Battery Life (Playback with Case) | 40 hours |
| Water Resistance | IPX4 |
| Noise Cancellation | Yes |
| Microphone | Yes |
| Weight (per earbud) | 5.1 g |
| Weight (charging case) | 47.3 g |
| Bluetooth Profiles | A2DP, AVRCP, HFP |
Connects both earbuds for an immersive stereo listening experience.
Enables the use of a single earbud for calls or audio playback.
Manage music playback, calls, and activate voice assistants via tap and hold gestures.
Control ANC, Ambient Aware, and TalkThru modes for managing environmental sound.
Procedure for pairing the earbuds with a new Bluetooth source.
Steps to reset the earbuds to their original factory default settings.
Utilize the app for Voice Assistant setup, gesture customization, and EQ adjustments.
To Next Page