Harman XXV User Manual (English)

Other manuals for Harman XXV

Owners Manual Care And Operation35 pages

Installation & Operating Manual32 pages

Installation Manual26 pages

Questions and Answers:

J
James WellsJul 26, 2025
How to troubleshoot a Harman Stove that does not feed?
- J
  Joel BrownJul 26, 2025
  If your Harman Stove isn't feeding, start by checking if there's fuel in the hopper. Also, ensure that all doors are closed and that the gaskets on the doors or hopper lid are intact and not loose or missing. If those aren't the issue, you may not have put enough fuel or starting gel in the burn pot before manually lighting the fire. Remove all fuel and examine the area, clearing any obstructions. Lastly, the feed motor may have failed.
M
Mark RodriguezAug 1, 2025
Why is my Harman Stove heat output so low?
- L
  Laura PattersonAug 1, 2025
  If your Harman Stove is producing low heat, several factors could be at play. The feed rate might be too low, meaning the stove isn't getting enough fuel. A gasket leak could be causing a draft that's too low, affecting combustion. Also, the pellets themselves might be of poor quality or damp, which reduces their efficiency.
K
kevin60Aug 8, 2025
What to do if my Harman Stove fire has gone out?
- C
  Charlotte SmithAug 8, 2025
  If the fire in your Harman Stove has gone out, several issues could be the cause. First, check if there is fuel in the hopper. A low draft, potentially caused by a blocked flue, can also extinguish the fire. Restrictions in fuel flow or a hopper lid that isn't properly closed could also be culprits. Lastly, a failed feed motor or combustion blower could be responsible.
R
robertcarterAug 13, 2025
Why are there partially burned pellets in my Harman Stove?
- J
  jeffrey39Aug 13, 2025
  If you notice partially burned pellets in your Harman Stove, it could be due to several reasons. The feed rate might be too high, or there could be a poor air-to-fuel mixture. Check the burn pot clean-out cover and air intake. The burn pot or heat exchanger tubes may also need cleaning. Poor or incomplete combustion can also cause a blink control board status indication.
V
vjenkinsAug 20, 2025
How to fix smoke smell from Harman Stove?
- N
  Nathan AlvarezAug 20, 2025
  To address the smoke smell coming from your Harman Stove, seal the vent pipe joints and the connection to the stove using silicone.