Harmony Ultimate - Synchronizing Split Bases; Wireless Synchronization Method

Synchronizing Two Bases
-13-
A B
Using the Remote
A
B
If you have split bases, follow these instrucons to operate both sides with one remote control in a synchronized manner.
Skip this step if you don't have split bases.
1. Make sure each remote control operates a respecve side (i.e., Remote A controls Base A and Remote B controls Base B).
2. Pair Remote A to Base B, then base A and base B can be simultaneous operated by Remote A.
3. Test moving both bases with Remote A. Remote B will no longer funcon.
Tip: You can also set up dual controls using the included Sync Cable.