What to do if the Harmony Indoor Furnishing handset doesn’t function – no power light?
If your Harmony Indoor Furnishing handset isn't working and the power light is off, first ensure the furniture is properly connected to the mains power supply. If it is, check that the handset is correctly connected to the controller, paying attention to the color coding of the connectors.
Why does an unexpected operation occur when a button is pressed on the Harmony HPI-8199 handset?
If pressing a button on your Harmony Indoor Furnishing handset results in an unexpected operation, the connectors might not be plugged into the correct sockets. Verify the connections, ensuring they match the color codes.
What to do if when a button is pressed on the Harmony HPI-8199, the corresponding actuator does not respond?
If pressing a button on the Harmony Indoor Furnishing handset does not cause the corresponding actuator to respond, first check the connections to ensure they are plugged into the correct sockets. These connections are color coded for easy identification.
How to unlock Harmony Indoor Furnishing after power failure?
If no adjustment can be made to your Harmony Indoor Furnishing when the power is on, the handset might be locked. After a power failure, the handset automatically switches to the locked state. To resolve this, release the handset using the magnet.
General| Brand | Harmony |
|---|---|
| Model | HPI-8199 |
| Category | Indoor Furnishing |
| Language | English |
Details model variations, handset options, and optional features for the HPI-8199.
Key safety precautions for nursing staff, carers, and users regarding bed operation.
Essential safety instructions for the correct and safe assembly of the bed.
Critical safety advice for performing maintenance and inspection procedures on the bed.
Detailed instructions for assembling the Harmony Homecare Bed, including diagrams.
Guidance on connecting the bed's controller and handset to the actuators.
Essential checks to perform before operating the bed for the first time.
Instructions for using the 10-button handset, including locking functions.
How to raise and lower the knee-break section of the bed using the handset.
Instructions for manually adjusting the calf/leg section of the bed.
How to raise and lower the backrest section of the bed.
How to raise and lower the overall height of the bed.
Using the auto-contour feature for simultaneous backrest and knee-break adjustment.
Operating Trendelenburg and Reverse Trendelenburg tilt functions on equipped models.
Instructions for extending the main bed frame by 170mm.
Steps for extending the mattress platform section of the bed.
Guidelines for safely attaching side rails to the bed, including safety clearances.
Steps to safely disconnect the controller before moving or storing the bed.
Instructions for safely dismantling the bed for transport or storage.
Recommended environmental conditions for storing the bed when not in use.
How to safely clean the bed using appropriate detergents and cloths.
How to disinfect the bed using suitable disinfectants.
Routine daily checks and maintenance tasks for the bed.
Table of common problems, their causes, and recommended solutions.
Detailed bed dimensions, angles, load capacities, and section weights.
Electrical supply, frequency, current draw, sound level, and protection class.
Information on the warranty period for motors, electronics, and frame.
Terms and conditions required for the warranty to remain valid.
Specific conditions and damages not covered by the product warranty.
Procedure for submitting a warranty claim, contact details, and required information.
General terms regarding warranty transfer and governing law.
To Next Page
