Harmony HPI-8199 - Expected Service Life of the Bed; Homecare Bed Technical Specifications; Bed Data and Dimensions

Page 2 3 of 2 8
Disposal of the individual materials must be carried out in accordance with the valid regional
environmental and disposal regulations.
Beds are not to be disposed of with household waste; they must be taken to local waste
collection depots.
Electronic components, electric cable and rechargea
ble batteries/batteries are not be
disposed of with household waste but taken to the stipulated waste disposal depot and
disposed of in accordance with the current regulati
ons.
Note
If you have any questions regarding disposal please consult your local waste disposal depot
or
Apex Health Care3URGXFWV.
20. Expected Service Life
The expected service life of any medical bed is highly dependent on usage, storage conditions
and maintenance regime. Providing that usage is not
excessive, that the bed is used and stored
in ideal conditions and that the routine maintenanc
e is strictly followed, that any damage is
repaired immediately then this bed is expected to have a service life in excess of 5 years.
21. Specifications
21.1 Bed data
Overall length
22 33 mm
Overall length
(extended)
240
3 mm
Overall width 9 46 mm
Mattress platform
1982 x 8 83 mm
Height range
234 - 638 mm / 294 - 698mm
Backrest angle
0-72
0
0
0
Knee-break angle
0-2 5
Calf raise angle
0-18
0
Trendelenburg
12
0
Reverse Trendelenburg
12
Safe Working Load (SWL)
2 0 0kg
Max patient weight
1 80kg
Total bed weight
86kg
Individual bed section weights:
25kgHead platform section
25kgFoot platform section
Bed ends
18kg (each)